Traditional computational models predict daylight illuminance in a space by dividing window surfaces into discrete areas and then calculating the apparent luminance of each window element by multiplying the luminance of the natural light source in a given viewing direction by the window transmittance in that direction. This approach works well for conventional glazing materials but is incapable of modeling commonly used, but complex, window systems such, as those with specular reflective venetian blinds. We describe a new approach that combines measured luminance distributions for complex window systems with a flux transfer calculation within the space. This method resembles the calculation of illuminance from electric light fixtures where the candlepower distribution of the fixtures is measured and used as an input to the calculation. Based on the variable luminance characteristics of the window system, the SUPERLITE program calculates illuminance at the workplane over the entire space. The measurement techniques and mathematical implementation in the SUPERLITE program are described. This approach allows a wide range of complex window and shading systems to be evaluated without continuous changes in the computational program. A special apparatus for measuring the bidirectional transmittance of window systems has been built in conjunction with this approach. Sample results from the program are compared to measurements made in scale models in a sky simulator.

1 aKim, Jong-Jin1 aPapamichael, Konstantinos, M.1 aSelkowitz, Stephen, E.1 aSpitzglas, Mark1 aModest, Michael, F. uhttps://buildings.lbl.gov/publications/determining-daylight-illuminance01381nas a2200157 4500008004100000245006900041210006900110300001000179490000700189520086200196100002001058700002001078700001801098700002701116856008001143 1985 eng d00aScale Model Measurements for a Daylighting Photometric Data Base0 aScale Model Measurements for a Daylighting Photometric Data Base a44-610 v153 aWe present initial results of a study to produce a high-precision photometric reference data base using scale model photometry and computational daylighting prediction tools. For this study the SUPERLITE computer code was used. We illustrate the importance and difficulty of fine-tuning the scale model experimental set-up and measurement procedures to produce highly precise results. We discuss the advantage of separating the direct component of illumination from the internal reflected component as an aid to understanding discrepancies between measurements and calculations. We use results of the study to suggest the circumstances in which calculation procedures should be used to generate the references, and those in which the precise scale model photometry is the recommended technique. Further research directions in the field are described.

1 aSpitzglas, Mark1 aNavvab, Mojtaba1 aKim, Jong-Jin1 aSelkowitz, Stephen, E. uhttps://buildings.lbl.gov/publications/scale-model-measurements-daylighting01928nas a2200121 4500008004100000024001100041245008200052210006900134260002500203520148000228100002001708856007801728 1984 eng d aDA-17200aDefining Daylighting From Windows in Terms of Candlepower Distribution Curves0 aDefining Daylighting From Windows in Terms of Candlepower Distri aChicago, ILc06/19843 aThis work describes a method for evaluating quantitatively the daylight admittance of windows under any outdoor conditions in terms that make it possible to calculate interior light distribution. The work is based on a new concept in quantitative daylight analysis, the Transmission Function Approach, developed by the author while preparing graduate thesis (1976 and 1982) [2], [3], and [4].

The visible daylight flux introduced through a window (or other daylight-admitting aperture) can be considered, from the point of view of the internal space, as being emitted from a point source or from a finite-area uniform source. The photometric properties of those light sources are defined in terms of the well-known candlepower distribution curves. The ways in which this approach can be applied for different window designs are demonstrated.

This approach to the photometric properties of window systems allows one to translate typical daylighting calculation problems into a format in which they can be resolved using traditional electric lighting calculations or computer codes. Even daylighted-oriented computer codes are limited as to the geometric complexity of the windows they can model--this method eliminates such limitations. It will also contribute to a better understanding and visualization of the photometric properties of various windows and other daylight-admitting elements. This approach, therefore, may also serve as an educational tool.

1 aSpitzglas, Mark uhttps://buildings.lbl.gov/publications/defining-daylighting-windows-terms